Wondering to set up a Linksys WiFi range extender? If yes then wonder no more. You have reached at the right place. Here, in this post, we will make you aware of the complete easy to execute steps to the complete Linksys extender setup process without failure. Slowly-slowly scroll down to begin with the installation process.
Linksys WiFi range extenders are splendid with networking devices/gadgets that help in increasing the existing WiFi coverage and range. Linksys range extenders are widely used devices to boost up the internet signals coming out from the main router. In short, Linksys wireless range extenders are intended for making the continuous and uninterrupted WiFi signals available in hard-to-reach areas where no internet connectivity has been detected.
If you want to make your existing networking powerful then configure it with Linksys WiFi range extender.
Without wasting your precious time, let us guide you on how to setup a Linksys range extender easily like a pro.
Requirements for Linksys extender setup and installation
In order to set up and install a Linksys extender, you must have its default web address i.e. extender.linksys. It is the web address that is used for accessing the Linksys WiFi extender login. Additionally, you must have the below-mentioned things handy with you:
- Model and the serial number of your Linksys range extender.
- Wireless network name (SSID).
- WiFi channel number.
- Password/passphrase or the security key.
- The default login credentials for Linksys range extender login.
However, the default wireless network settings can easily be changed via a valid Linksys cloud account. In case, you have no idea about how to change them, then without any delay, contact our finest and highly-qualified experts at 1-844-726-2255 (toll-free number). We give you our words that your extender Linksys setup and installation will be a satisfying experience with our experts.
Once you are carried out with all the above-said things, get started for the Linksys WiFi extender setup and installation process.
Linksys WiFi extender setup and installation
Below are the steps to set up and install a Linksys smart WiFi range extender with ease.
- First and foremost, plug your Linksys device into a wall socket that is closer to your existing WiFi router.
- After that, connect your Linksys range extender to a computer or laptop wirelessly or by using an Ethernet cable.
- Now, head towards a relevant or appropriate web browser and type http://extender.linksys.com not into the search bar, but into the address bar of your opened web browser.
- A new Linksys extender login will display.
- Here, you have to follow the on-screen instructions to start with the setup process of Linksys extender.
- Once you are done with the setup process of your Linksys range extender, click on Next and save the settings.
- Unplug your range extender and plug it back after 2-3 minutes.
Good Job! You have successfully set up your Linksys range extender.
Linksys range extender configuration
Most Linksys range extender models consist of an LED at the front panel that provides the information about the WiFi setup as well as the power. On the off chance that when the LED light indicates a solid green color, it means that the Linksys device is power on properly. Despite the fact that if the LED light on it blinks with any other color, it means that the Linksys extender is not receiving the internet signals from the main router.
In that case, you have you choose a different location for your range extender but that must be in reach of your WiFi router. In addition, you might notice a WPS (WiFi-Protected Setup) switch along with an Ethernet port through which you are able to configure your Linksys WiFi extender with your existing router properly.
If you want to configure your Linksys extender using the WPS method, then it is quite easy.
- Push the WPS button on your range extender.
- Wait for 2-3 minutes and after that, push the WPS button on your main router as well.
- Then WPS LED on your range extender will start blinking that indicated that the Linksys extender setup using WPS method has successfully been completed.
Access the Linksys WiFi range extender
Once you have set up and installed your Linksys WiFi range extender, you can head towards Linksys WiFi extender login web page (default). Enter the correct Linksys extender login credentials. Provide a good power supply to the range extender by plugging it into a damage-free wall socket. Afterward, connect all the wired and wireless devices to the Linksys extender and enjoy the uninterrupted speed of the internet.
As a matter of fact, if you experience any sort of issue while installing and setting up the Linksys range extender, then write your queries at support@extenderlinksyscom.us right away. We have the team of finest technicians in the world that have the capability of fixing all your brainteaser technical issues instantly.