Here are the simple steps to an effective skirting tile strategy. As you read, these simple steps will help you determine which type of tile will suit your needs best.
You will need to consider these essential elements when planning your building project to make the most of your budget and time.
The majority of construction professionals and homeowners often find that the only way to save money on the finished product is to use a professional.
Although you will still be able to do a great job yourself, hiring a professional is an excellent idea to help protect your building’s integrity. The following are the steps to an effective skirting tile strategy:
Measure the Length of the Walls:
There should be no room left behind between the top of the wall and the highest spot on the wall (feet). Measure the width of the wall and take that number of inches to the width of the foot. This is the measurement you will need.
Measure the Roof Line:
Using a set of protractors and measuring tape, measure from the bottom of the skirting to the lowest part of the roof. It is recommended that you take this measurement without using the skirting tiles Dubai. It will confirm that there is no room for error. There should be no room behind the skirting.
Measure the Height of the Skirting:
As you finish the measurement of the roof, take this measurement as well. This measurement will be used to determine how many feet of the skirting you will need. For a smaller house, there may be no need for a skirting.
Find the Floor Tiles:
Determine which type of floor tiles you want to use. It comes in a variety of colors, designs, and textures. The most straightforward kind of floor tile is wooden floor tiles. You can also choose from tile with or without a pattern, tile with or without a textured surface, and tile with or without grout.
Your floor tiles will need to be placed directly on the concrete. Floor tiles have been known to “grow” over time and may not fit correctly in some areas. It is best to check with a pro if this happens to you and replace the tiles yourself.
Install the Skirting Tiles:
Now that you have the floor tiles and the skirting tiles in place installing the tiles is time. Use a steel or wood trowel to spread the grout over the entire tile area. Be sure to distribute the grout evenly. It is a good idea to leave a few inches of grout to allow for future tile growth.
Lay the Skirting Tiles:
Now that the grout has been spread and has a look, you want to lay the first skirting tile over the grout. If your bathroom is already finished, you can start by laying down the tiles in the shower. This will help you determine how the tile will look when finished.
Peel the Tile:
Use a damp rag or brush to remove excess grout from the tiles’ edges. The most common mistake made is allowing a couple of inches of grout to remain on the tile. Over time, this can lead to a seam that sticks out from the tile and can make the file un-sinkable.
Use a Sponge Bead:
After removing the excess grout, use a sponge or a bead to smooth out the tile’s surface. This will give it a smooth, even surface. A bit of leftover grout will come off with a sponge. With a bead, it is a lot easier to get rid of all of the excess grout.
Finish the Tile:
It is recommended that you remove the bead after applying the bead or sponge to the tile. The grout will stick to the bead, and it will be more challenging to apply the grout to the rest of the tile once the bead is removed. This will ensure that you get a uniform look for the rest of the tile.
Conclusion
To do, this will ensure that you have an easy to follow and simple to support wood skirting strategy. If you get this right, the first time, you will have no problem building a professional-looking shower in no time.