Proper boiler maintenance is extremely crucial yet overlooked by a number of people of the UK. It will not only let you to perform expensive replacement and repair, but also affects its working ability. As a result, it can cause tremendous damages to your home and can be threatened for your family’s health.
This blog compiles 11 effective and simple tips to keep the boiler efficient in the long run. Let’s have a look on them.
- Service your boiler every yearIf you want to keep the functional ability of your boiler in its best, try to take proper maintenance of it. It will minimise the chance of breakdown, enhance its lifespan and keep you energy bill affordable. During your purchase, check that you are provided the one with manufacturer’s warranty.
Moreover, to keep it valid, annual servicing of the boiler is what you need! Only reliable boiler repair engineers in London can perform the extensive checking of the system for detecting its minor issue and working condition. It will prevent you from entertaining inconvenient and expensive breakdowns at the same time.
- Check the pressure of your boilerBoiler must be set in the right pressure so that it is effective enough to supply the adequate amount of water throughout the entire property. Even it is required for even distribution of the heat all over you house.
Look for the pressure gauge to check it is in correct level as per the manufacturer’s instructions for the user. If the pressure is extremely high or low, you can adjust it manually too!
- Bleed its radiator at least once in a yearAir and moisture can get trapped in the radiator over time. This will resist the radiator to get heated up fully and results in the formation of cold patches around the system. Hence, bleeding is required to release these trapped air particles and restore the efficiency of the system.
Sometimes some people paint the system which makes it tougher to adjust. It can also form due to the loosening of the WD40 and you can tight it on your own. Otherwise, heating engineer is there to help you in every step!
- Balancing of the radiatorsIf you have installed the boiler far away from the radiators then, balancing is what you require! It is vital because at that time some radiators will get hot and some will still remain cold. Though the procedure is much different than that of the bleeding yet, it will incorporate your system to get heated up more evenly and it will spread throughout of your home.
- Inspect the problems of your boilerOne of the most regular radiator issues is sometimes it gets hot on its top while remaining cold at the bottom. There is nothing to get surprised as it is very common and basically happens when there is a deposition of the dirt and debris inside the system for long.
As it gets harder over time its affect the heating efficacy of the system greatly. Not only it will corrode your system progressively but also hikes up the heating bills to a great extent. At that time, only a heating engineer can deal with the issue by performing PowerFlush and if necessary they will replace the radiator valve too.
- Ensure that the flame of the boiler is blueBoiler will always run by producing a strong blue flame. Inspect the system regularly to observe the change in the flame! If it turns into yellow or orange, then you must call your Gas Safe heating engineer for requesting to visit your home on an urgent basis. Generally, it occurs when there is a leak of carbon monoxide (CO) which needs to be addressed ASAP.
- Ventilate your boiler properlyInstallation of boiler requires adequate space to ensure its proper ventilation. Otherwise, cluttered space will not allow the system to get ventilated properly. If you are thinking of housing of the system in your cupboard, you can do so! Just make sure that there will be a minimal gap of 700mm within the wall or obstruction and boiler.
- Check the external pipe for drippingThe external pipes of the boiler system are known as overflow pipe. If dripping water is noticed by you, then it clearly represents that there is something wrong in its operation. Call you Gas Safe engineer to repair the pressure release valve for ensuring its efficacy again. You may look for a local heating engineer online too!
- Ensure the accessibility of the flueNowadays, boilers are designed in such a meticulously way so that its flues are visible and accessible easily. With the help of flue regulation checking, now you can determine whether there is any issue regarding it or not!
Accordingly, loose joints or cracked area can be spotted by you to fix it within shortest time possible. If it isn’t accessible, then you have to hire a Gas Safe engineer who can restore it by installing an access panel to reach it within the ceiling.
- Lag the pipes regularlyBefore the arrival of winter, it is great to lag the entire external piping system of your home. It is not so expensive and you can get ready-to-use DIY lagging from any local store.
As it is effective to prevent your pipes from freezing, it will alleviate the boiler repair expense and hassle of dealing with this common issue as well. Even the chance of boiler breakdown will get reduced to some extent at the same time.
- Don’t try DIY repairing of your boilerIf your boiler needs any repair, you must contact with a Gas Safe heating engineer as soon as possible. These people are only allowed to perform repairing and other works associated to any gas appliances legally. Moreover, they will assure you the efficient and effective working of your boiler at the same time.
Before letting any engineer to start with the repairing job; make sure to check their Gas Safe ID on their arrival to your home. It is important because, gas appliances and pipes are very dangerous and can result in some explosive consequences like fire breakouts, carbon monoxide poisoning and major explosions.
One of the easiest ways to look for a reliable Gas Safe engineer in your locality is online search and send quote request to the selective ones. The company that will offer you with 3 quotes stating their reliable services, pricing structure and fields of specialisation in detailed manner can be the ideal one for your job.
You may also contact 4D Heating and Plumbing to get your job done by the highly-experienced Gas Safe engineers of the city.